Skip to main content
Voyten Electric

Eaton Power Defense Molded Case Circuit Breaker Catalog Number Decoder

Decode Eaton Power Defense molded case circuit breaker catalog numbers. Reads the 14-character base number — certification family, frame, poles, interrupting rating, ampere rating, trip unit and terminals — and the 20-character configured number with its factory-installed accessories, and recognises accessory, terminal-kit and loose trip-unit numbers. The decoder is free, needs no login, and runs entirely in your browser — paste a catalog number such as PDG23M0100P2ML and it returns every field it can resolve, plus a position-by-position map showing which character carried which value.

Manufacturer
Eaton
Frames
PD1 – PD6 (PDG · PDF · PDD · PDJ · PDK · PDL · PVGard)
Ratings
15A – 3,000A

What this decoder identifies

  • Certification family (Global, 100% rated, 240 V, DC, PVGard)
  • Frame size and, on Frame 3, the 400 A or 600 A construction
  • UL/CSA interrupting rating at every printed voltage
  • IEC 60947-2 Icu / Ics breaking capacity
  • Thermal-magnetic, PXR 10 / 20 / 20D / 25, MCP or MPCB trip unit
  • Terminals, including the exact terminal kit
  • Factory-installed accessories on 20-character numbers

Also sold or stamped as

The same breaker family appears under several names depending on the era of the nameplate. This decoder covers numbers labelled:

  • Eaton Power Defense
  • PD MCCB
  • PDG / PDF / PDD
  • PD1 / PD2 / PD3 / PD4 / PD5 / PD6
  • Power Defense molded case

Eaton Power Defense Molded Case Circuit Breaker — common questions

Where is the catalog number on a Power Defense breaker?

On the label on the breaker face. A complete breaker number is 14 characters, such as PDG23M0100TFFJ, or 20 characters when accessories were fitted at the factory. Numbers with an X after the frame digit, such as PDG3X3TA630, are accessories, terminal kits or loose trip units rather than breakers, and Frame 3 and 4 trip units carry a label of their own.

Does the interrupting letter mean the same thing on every Power Defense breaker?

No. Eaton assigns the letter by family and frame. M is 65 kA at 480 V on a PDG2, but 100 kA at 240 V on a PDD breaker, and on a PDK DC breaker it is a DC rating. The decoder reads the letter against the right table for the family and frame instead of using one letter chart.

Which older Eaton breakers does Power Defense replace?

Eaton publishes a frame-level equivalence only: PD1 for the Series G EG and Series C G-frame, PD2 for the F-frame, PD3 for the K-frame and LG, PD4 for MDL, PD5 for N and NG, and PD6 for R and RG. There is no catalog-number cross-reference, and accessories, handle mechanisms and neutral sensors do not carry over.

Related resources

Working in a switchgear room with no signal? Every decoder also runs offline from a local folder.

Open the Offline Kit

Can't read the nameplate?

If the plate is painted over, corroded or missing digits, send us what you can read or a photo — our team identifies legacy and obsolete breakers every day, and sources the new-surplus or reconditioned replacement.